Enerpac JH-Series Manuel d'utilisateur télécharger pdf (Page 2)

SAFETY

INFORMATION

To avoid personal injury or property damage during system operation, read and follow

all

CAUTIONS, WARNINGS, and INSTRUCTIONS included with or attached to each product.

ENERPAC CANNOT BE HELD RESPONSIBLE FOR DAMAGE OR INJURY RESULTING FROM

UNSAFE USE OF PRODUCT, LACK OF MAINTENANCE, OR INCORRECT PRODUCT AND

SYSTEM APPLICATION

. Contact Enerpac when in doubt as to applications and safety

precautions.

a WARNING

To avoid personal injury, always wear proper personal protective gear

when operating hydraulic equipment, i.e. safety glasses, gloves, etc.

a WARNING

Make sure that jacks are protected from external sources of damage,

such as explosive heat, flame, moving machine parts, sharp objects,

and corrosive chemicals. DO NOT expose equipment to temperatures

above 150°F (65°C).

a CAUTION

Use only Enerpac hydraulic fluid. DO NOT use brake or synthetic fire

resistant fluids because they will damage the jack seals.

a WARNING

Provide a solid and level foundation

adequate to support the load being lifted.

a WARNING

Position the jack to distribute the load

over the entire base of the jack. The

jack plunger must be centered in the line

of force of the load as it is being lifted.

a WARNING

Stay clear of loads supported by hydraulics.

Jacks are lifting devices ONLY. After the load has

been raised, it should be blocked, using material

capable of supporting the load.

a WARNING

DO NOT exceed rated stroke. If you

need to lift a load further, support the

load, raise the level of the jack with a

sturdy support and then continue the

lift.

1 2 3 4 5 6 7 ... 31 32

Pas de commentaire

Enerpac JH-Series Manuel d'utilisateur Page 2